PC fan controllers may be the last thing on your list when it comes to personalizing your PC to its full capacity. A reliable fan controller, on the other hand, will assist extend the life of your computer because it is necessary for cooling it down.
In this article, we cast the spotlight on 9 of the Best Fan Controller you can buy to optimize your computer’s performance.
- 10 Best B460 Motherboard Budget To High-End 
- Top 7 Best GPU for Ryzen 5 3600 2021 List
- Best Graphics Card For i5 4460
Best Fan Controller
1. SilverStone CPF04
The SilverStone CPF04 is the Best Fan Controller for enthusiasts who need to control several system fans. One motherboard PWM fan header can be expanded to support up to eight fans.
The SilverStone -CPF04 can give clean, consistent voltage to any fan for best performance when powered directly via SATA cable from the computer power source and filtered through a built-in 2200F capacitor. It is a fantastic choice for system fan expansion since it is equipped with speed detection sensors for accurately regulating up to 8x PWM fans at the same time.
This hub allows the user to attach up to 8 PWM fans to it, which are then linked to the motherboard’s single PWM fan header. This hub draws power directly from the PUS through a SATA connector, obviating the need for the motherboard’s PWM fan header to be powered. To provide a reliable and clean power supply to the fan headers of this hub, the power is filtered using a built-in 2200F capacitor.
2. NZXT Sentry 3
The Sentry 3 from NZXT The Sentry 3 is the successor to the Sentry 2, with a larger 5.4-inch display, a revamped user interface, and the “link,” which allows you to operate a group of “connected” fans at the same time. Let’s take a closer look at the NZXT Sentry 3.
The NZXT Sentry 3 has a revamped user interface and a larger 5.4-inch touchscreen display panel. When compared to the previous-gen Sentry 2, I believe the Sentry 3 is considerably superior to the Sentry 2.
Aside from the larger display and improved UI, it also has a Link Group feature, which allows you to link up to five fan channels and operate them all at the same time. Temperature and fan speed are also monitored with precision on the Sentry 3. The temperature can be displayed in degrees Celsius or Fahrenheit, and the fan speed can be displayed in RPM or %.
The NZXT Sentry 3 can deliver 15 watts per channel and has a maximum combined wattage of 75 watts. This is ideal for 120mm and 140mm fans, as well as high-performance fans. The fan controller comes with a Temperature Sensor that you may use to monitor the temperature of the CPU or any other part of your system.
3. Thermaltake Commander FP
The Thermaltake Commander FP is a low-cost internal Best Fan Controller comparable to the Electop, but it has a few key differences that make it a superior investment, at least in our opinion.
The new Thermaltake Commander FP PWM fan hub can power up to ten separate PWM fans, allowing users to saturate the chassis with fans while maintaining excellent cable management. The Commander FP, with its blue, LED indicator light, ensures that the inside of your case looks as good as the outside, making it the ultimate solution for cooling performance enthusiasts or users looking for a hassle-free installation!
4. Phanteks PH-PWHUB_02
The controller can control both 3pin (DC) and 4pin (PWM) fans at the same time and can connect up to 8 fans or more. With three speed settings, Silent, Balanced, and Performance, you can fully regulate your fan arrangement with the manual remote. With the included input cable, you may connect and sync the Universal Fan Controller to the motherboard.
Thanks to the embedded magnets, you can easily attach the Universal Fan Controller on any metal surface, and use the accompanying Velcro to keep your Manual Remote close at hand. Whether you’re searching for quiet or performance, the new Universal Fan Controller from Phanteks can help you optimize your system quickly.
It’s worth noting that you can add more admirers to your account. Please note that the optional Phanteks 3-pin (PH-CB-Y3P) or 4-pin (PH-CB-Y4P) y-splitter cables can be used to add more fans.
5. Kingwin FPX-001 Fan Controller
The Kingwin FPX-001 is another low-cost manual PC case fan controller that’s ideal for people who have a lot of case fans but don’t have enough internal connections.
The Kingwin FPX-001 Best Fan Controller for the price and is simple to operate and configure. It comes with 3-pin connections that simply plugin and are ready to use. This makes it an excellent choice for individuals who don’t want anything too sophisticated but yet want to modify the way their fans operate. Despite being larger than the ZRM&E, it is still a small fan controller, measuring 4 inches by 3.7 inches. It should fit into your computer’s hub without issue but double-check before purchasing.
6. Electop Fan Controller
This Electop fan controller is a solution that is quite similar to the CRJ Blackout in that it is also a very affordable and straightforward product.
In terms of connectivity, this Fan Controller can support up to ten different case fans (both 3-pin and 4-pin connector types), which is more than a typical gaming PC can support.
Increase the number of 4-pin fan interfaces, addressing the issue of a lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, it can start up to 10 channel fans at once.
The RED CPU interface is the dedicated CPU fan interface in the hub interfaces (with speed detection function). The remaining nine traditional fan interfaces have the PWM function, but no speed signal, because the mainboard can only receive one rotation speed signal.
7. ARCTIC Case Fan Hub
The case fan hub can be flexibly positioned within the housing. It only has one connection connecting it to your motherboard. This means you can get rid of any extra cables and just lay them in the housing’s invisible area. All fans linked to the Case Fan Hub get your specified PWM signal synchronously. The first fan slot’s RPM is read and sent back to your system. Even if your mainboard doesn’t have enough fan headers, the case fan hub adds 9 extra case fan slots to your system.
SATA Power is used to power the fans directly from your power supply. As a result, there is no voltage drop at the fan speed, allowing for smooth, smooth operation.
8. NZXT Fan Controller AC-2RGBC-B1
With three 10W fan connectors and two addressable RGB channels, NZXT AC-2RGBC-B1 RGB & Fan Controller allows for exactly that. Three 1-to-3 fan splitters, as well as Velcro and magnets to secure the controller to your case, are included with the controller. It’s a compact device, measuring 65mm x 75mm and housed in a black plastic chassis.
It’s well-made, small, and comes with a slew of fan splitters to accommodate even more enthusiast PC setups. Depending on the situation, you may even choose between magnets and Velcro. If you already have an NZXT case that isn’t an I version, this controller is a wonderful addition that will blend right in. I strongly advise everyone else to put this on their shortlist.
9. CRJ Blackout
It is a very little fan controller that connects to a single 4-pin connection through a braided wire and has five fan connections. It’s simple to install to the case’s inside with the help of the 3M adhesive mounting pad on the rear.
It’s not a flawless product now that it’s a low-cost option, but it’s a good start. The only thing to keep in mind is that PWM only uses one channel. Unless their speed is explicitly adjusted, all associated fans will spin at the same speed as the CPU fan.
Overall, the CRJ Blackout, which we can recommend for people with motherboards with a restricted number of fan connections, is an acceptable but critical option. Those who are seeking