Top 9 Best Thermal Paste For CPU & GPU

If you ever build pc in your life then you already know that you need Thermal Paste, but the most Thermal Paste in the market is either very low quality or very cheap, but that problem can be avoided if you check this article out, because in this article we have listed 9 Best Thermal Paste that will give you the best Thermal Paste experience.

Read Also:

Best Thermal Paste

1. Cooler Master MasterGel Pro v2

Cooler Master MasterGel Pro V2 High Thermal Conductivity Compound for CPU  Coolers (9 W/mK) – Ultra-Efficient CPU/GPU Heat Dissipation with Zero  Electrical Conductivity, Applicator Included : Electronics -

MasterGel Pro V2, an enhanced compound with strong CPU/GPU conductivity, provides improved heat dissipation and heat transfer from the chipset to the cooler base. Aside from the aesthetics, the thermal grease has been tweaked to meet your performance requirements.

To keep my 4 physical core(8 virtual core) Intel processors from overheating, I ran it at 30-40% load with the CPU clock set at 70 percent maximum frequency. Even running a computer at full load at 70% frequency would result in temperatures of 100C, and running a computer at 40% load at 100% clock frequency would result in the same high temperatures.

I was able to operate a 100% CPU with 100% clock frequency at 90C immediately after applying thermal grease. It’s not quite as amazing. However, temperatures do not exceed 75°C after one day of treatment. It appears that this grease takes about a day to fully activate after being applied. Because I run my computer 24 hours a day, 7 days a week, it’s possible that grease reached its full capacity early in my situation.

2. Thermal Grizzly Kryonaut

Best Thermal Paste

Thermal Grizzly Kryonaut is a somewhat viscous thermal compound with excellent stability that is easy to work with and resists drips and runs. This paste is popular among system builders since it is simple to use and clean up.

The machine worked well right out of the box, but it had heating concerns. Temperatures were around 75-85 degrees Celsius with regular workloads, and 95-100 degrees Celsius when gaming. I tried undervolting and other solutions, but they didn’t work. After watching a lot of videos, I decided to give it an attempt. I expected the machine to run a little cooler, but to my surprise, usual temperatures are between 46 and 60 degrees Celsius, and it never exceeds 75 degrees Celsius while heavy gaming. Even after overclocking, there is no thermal throttling. For all gaming devices, this is a must-do.

3. Cooler Master MasterGel Maker

Best Thermal Paste

In terms of specifications, the MakerGen looks intriguing, as least as interesting as a tube of paste can be. The MasterGel Maker should have excellent conductivity thanks to its nano-diamond particles, but I think we’ll find out in our test.

The fun phase of our testing trip has here! The temperatures rose when our rig was fully loaded, but the Cooler Master MasterGel Maker remained on top of the chart alongside the Arctic MX-4. While other top brands maintain temperatures of 70 degrees or higher, the MasteGel maintains a steady temperature of 68 degrees.

4. Arctic MX-5 Thermal Compound

Best Thermal Paste

This new substance has excellent heat conductivity, enabling you to push the CPU and GPU of your computer to their limits. The newer Arctic MX-5 thermal compound’s best feature is that it is metal-free and thus non-electrically conductive. This eliminates the risk of short-circuiting even when the load is high, making it a reliable item. The new compound has an 8-year shelf life, which means it will outlast your personal computer and will never need to be reapplied.

Valorant temperatures are around 68 C after this, while AC Valhalla has a MAX TEMP of 86 C. ( MAX Clock speed ).
Using throttle stop, I usually maintain my clock speed a little lower (Around 4.2Ghz for 2 cores and 3.8 for rest 4). Valhalla’s temperature is less than 75 degrees Celsius while using this option.

6. Gelid Solutions GC Extreme

Best Thermal Paste

As long as you’re utilizing\ a heat sink with high mounting pressure, GC-Extreme is the best thermal paste in our round-up, with a tiny advantage over the runner-up. It would be even better if this compound was a little softer and didn’t require heating before use. However, a little extra heat pays off, and we suggest it to overclockers and enthusiasts.

With their new, high-performance GC-Extreme compound, GELID Solutions has demonstrated that thermal paste makes a significant difference when cooling down a processor. The GC-Extreme is what you’re searching for if you want the top-performing grease on the market, taking 18 degrees Celsius off the usual paste that comes with your Intel processor and exceeding all of its competition.

7. Noctua NT-H1

Best Thermal Paste

Noctua has introduced a fresh, improved version of their old thermal paste in 2019, and it’s not half bad. This thermal paste is a good value, even if it only performs in the middle of the pack in terms of performance. It comes in a 10-gram tube as standard, making it ideal for large or frequent applications.

Following the application of Noctua to my Acer Nitro 5, (2019 model). The temperatures have clearly risen. Idle temperatures did not differ significantly from stock paste, however, maximum temperatures under intense gaming load performed admirably, though not to the standards set by previous reviewers.
I’m only posting the CPU temperatures because the GPU temps were virtually normal with the stock paste.
When the temperature is between 30 and 35 degrees Celsius, Acer stock paste is used. CPU temperatures: 55-60°C (idle) with auto fans; 95-100°C (gaming) with max fans.
Noctua CPU temperatures: 50-55°C (idle) with auto fans; 83-88°C (gaming) with no throttling at maximum fans.


Best Thermal Paste

I’ve always admired and loved the way Corsair goods are built. Everything Corsair produces has a high-end feel to it, as though it were crafted with genuine passion. Having said that, their thermal pastes… not so much. Even when compared to Artic Silver, MX-4, and Grizzly, neither of their pastes are particularly competitive. Grizzly hits it out of the park with this one. This isn’t the worst paste; for only 16 dollars for this “ultra” XTM 50 thermal paste, I’d expected it to perform better than my MX-4. Also, if you have an AMD Ryzen processor or something larger, the applicator is too small to cover the entire surface of the CPU. Although I will mention that at 4.2 GHz, I get 30 C idle and 75 C load.

Although I will say, 30 C idle and 75 C load at 4.2 GHz on my Ryzen 2700x is not too bad, just not the best. but you can definitely consider it.

9. Antec Formula X Thermal Paste

Best Thermal Paste

So I tried this thermal paste, and to my amazement, the maximum temperature I got with it was 68 degrees, but the temperature I got with stock applied thermal paste was 73 degrees. Excellent thermal paste.

Pratik Ranjan
Writer & Editor

Best articles